Programming mode
When using the programming mode, the display will be as follows:
Fig. 4
First thing to do is to choose one of the 4 program.
To select the programs press button A and B, one selected the desired program (between 0
and 3) pres button E.
To exit this mode without modifying anything press button D.
Each program (4) has maximum 9 scenes (called steps, from 0 to 8) each of variable timing.
Once a modification is done, you can see the projectors, connected to the led controller,
execute it immediately.
Once the program to execute has been chosen, the led controller will be as follows:
Fig. 5
The display in zone 1 will show:
PROG: number of the program chosen (from 0 to 3)
STEP:
is the step that is executing (from 0 to 8)
SEC:
is the time in second of executing the step (from o to 255)
6
Functions description
LED Controller is a dedicated console for led’s colour changers.
LED Controller is a DMX console, suitable for small applications and an easy to use but
professional controller for our led’s projectors.
LED Controller can control up to 6 groups of projectors via signal cable (DMX 512 signal).
One group is made by one or more projectors.
For each group there are 8 dmx channels, starting from channel 1.
Group 1 (from ch.1 to ch.8) Group 2 (from ch.9 to ch.17) Group 3 (from ch.18 to ch.25)
etc’….. up to ch. 48.
The dmx address (1
st
control channel) to the projectors depending to which group they
belong.
GROUP 1
GROUP 2
GROUP 3
GROUP 4
GROUP 5
GROUP 6
Ch. dmx
1
Ch.
dmx
9
Ch.
dmx
17
Ch.
dmx
25
Ch.
dmx
33
Ch.
dmx
41
Manual mode
This mode will appear the first time the LED controller will be switched on.
With this mode it is possible to control intensity and the colour of the light output for each
group of projectors or for all the groups.
To set the projectors is necessary to change the parameters of the zone 1.
R, G, B, A e STROB (Zone1). The number down to letters (Zone 2) is the DMX values of the
colour channel, from 0 to 255.
Fig. 2
3