Lampert PUK U5, Руководство по эксплуатации

Страница: 30 / 32

Lampert Tools USA 2020 28
- Do not point gun toward any part of the body, other
people, or any metal when threading welding wire.
MOVING PARTS can cause injury.
- Keep away from moving parts such as fans. - Keep all doors, panels, covers, and guards closed and
securely in place.
H.F. RADIATION can cause interference.
- High-frequency (H.F.) can interfere with radio navigation,
safety services, computers, and communications
equipment.
- Have only qualified persons familiar with electronic
equipment perform this installation.
- The user is responsible for having a qualified electrician
promptly correct any interference problem resulting from
the installation.
- If notified by the FCC about interference, stop using the
equipment at once.
- Have the installation regularly checked and maintained.
- Keep high-frequency source doors and panels tightly
shut, keep spark gaps at correct setting, and use
grounding and shielding to minimize the possibility of
interference.
ARC WELDING can cause interference.
- Electromagnetic energy can interfere with sensitive
electronic equipment such as computers and computer-
driven equipment such as robots.
- Be sure all equipment in the welding area is
electromagnetically compatible.
- To reduce possible interference, keep weld cables as
short as possible, close together, and down low, such as
on the floor.
- Locate welding operation 100 meters from any sensitive
elec-tronic equipment.
- Be sure this welding machine is installed and grounded
according to this manual.
- If interference still occurs, the user must take extra
measures such as moving the welding machine, using
shielded cables, using line filters, or shielding the work
area.