10
Impulse Mode:
Softspot ( Standard-Mode)
This welding impulse (impulse shape) is characterised by "soft" welding
behavior and is recommended for most applications.
Micro ( Micro-Mode)
This setting makes precise welds possible at very thin materials.
This particularly fine output gradation, as well as a special pulse shape in the
micro mode, is suitable particularly for material thicknesses smaller than
0,4mm and for fine build-up welds (e.g. at claw settings).
Gap (Joint-Mode)
This pulse shape is recommended for applications, in which it is essential to
weld in deep joints or angles.
The Gapspot (joint mode) is also very well suitable for silver. With this pulse
shape even normally difficult weldable silver alloys can be welded with
success.
.
5-2 Programming
(Only "PUK 3 professional plus")
Programmekey (3):
There are 5 programme places available to store individual settings.
By short pressing of the key (3) the individual programme places can be
selected.
To save a setting keep the programme key pressed, until the display
indicates "save" and the programme announcement flashes.
To select one of the 5 programme places, shortly press the programme key.
For confirmation and/or locking the memory procedure, keep the programme
key pressed until the display indicates "DATA saved".
The programming process can be stopped by short pressing of the output
regulator (6) at any time
