19
10 DISPOSAL INFORMATION:
Devices that are no longer in use (waste), can be made unserviceable by removing the
mains power cable.
For EU countries only:
As specified in European directive 2002/96/ EG on waste electrical and electronic
equipment, used electrical appliances must be collected and stored separately and
introduced into an environmentally compatible disposal system.
11 EG-CONFORMITY DECLARATION
The Manufacturer,
Lampert Werktechnik GmbH
Ettlebener Str. 27, D-97440 Werneck
Declares herewith that the following product:
Precision welding device
“DENTA PUK”
Complies with the provisions of the below mentioned directive, including any
amendments hereof, that were valid at the time of declaration.
Relevant EC guidelines:
According to low voltage guidelines 2006/95/EG
According to EMV (electro-magnetic compatibility) guidelines 2004/108/EG
The following harmonised standards were used:
EN 60974-6
EN ISO 12100-1
EN ISO 12100-2
Person duly authorised to carry out technical documentation: N. Hammer
Werneck, 30.10.2009
Lampert Werktechnik GmbH
Andrea Bauer-Lampert (Managing Director)