Lampenwelt GmbH & Co. KG
Seelbüde 13 ● D-36110 Schlitz
℡
+49(0)6642/40699-0
Operating Instruction No.: 008/2012
+49(0)6642/40699-20
Edition: 09/2012
1
/
2
Subject to technical modification without notice.
(GB) English
Operating Instructions
Article number: 9616014, 9616015
1. Introduction
Congratulations on choosing our product! Please unpack the product carefully and check that it is complete and undamaged. The light fixture
must not be used if there is any sign of damage to the wiring or electrical components. Please contact the manufacturer immediately in such a
case. In order to ensure safe and simple installation, as well as correct operation, please read the following instructions with particular care.
Keep the instructions and the installation manual in a safe place for future reference. The manual must be passed on to all subsequent owners
or users of the product. Ensure that any supplements you may receive have also been appended to the manual.
2. Package contents
•
1 LED wall light
•
Installation hardware
•
Installation and operating instructions
3. Correct use
This light fixture is designed for use outdoors. The light fixture must not be installed in a depression in which rainwater can collect and damage
it. All electrical and mechanical connections must be made in compliance with European safety standards. The light fixture may only be
installed on a stable and level substrate where it cannot tip over. It must not be exposed to major mechanical stresses or severe fouling. May
only be used as wall light.
4. Declaration of Conformity
This product complies with the requirements of the currently applicable European Directives and national regulations (DIN EN 60598).
Conformity has been proved and the corresponding declarations and documents have been filed by the manufacturer.
5. Safety and warning notes
The manufacturer cannot accept any responsibility and/or liability for bodily injury or property damage due to:
•
improper installation,
•
non-conforming use,
•
unauthorized modification of the product or
•
non-compliance with these instructions.
National and international regulations on electrical safety must be observed in conjunction with installation and operation. The light fixture
must completely disconnected from the power supply before and during installation work. Ensure that the wiring is not damaged or crushed
during the installation work. Always allow the light fixture to cool and ensure that it is completely disconnected from the power supply before
starting any maintenance work and before fitting a new lamp.
Electrical connections may only be made by an authorized and qualified electrician.
Damaged electronic leads may only be replaced by an authorized and qualified electrician.
This product and its packaging contain small parts which may be swallowed by children. For this
reason, the product and its packaging must always be kept out of reach of children!
6. IP-Symbolic explanation
IP (Ingress Protection) is the protection class which the light fixture affords protection against solid foreign bodies, contact and water.
IP 54
Protection against: Dust depositions, all contact from solid foreign body, splashed water from all directions.
(360°)