T5
CMOS COLOUR WIRELESS
VIDEO CAMERA
Art. 74434
WARNING
• Install the camere on a safe and stable surface
• Avoid installing the camera on the rear bumper or in a lower position,
so that there wont be any blind spots.
• Avoid installing the camera in places where the lens can easilly get
dirty from mud, exhaust gases, etc...
• Be sure to seal the holes made during the installation of the camera
to avoid water to flow inside.
INSTALLATION
1
Install the fixing bracket on the selected location.
2
Mount the video camera and fix it with the included fasteners. Before
tightening, adjust the camera angle.
3
Once the camera angle is set, adjust the sun visor and tighten the
screws.
4
Install the antenna at the back of the camera and face it upwards.
5
Connect the camera to the electrical system of the vehicle.
6
Activate the pairing mode on the display and press the PAIR button at
the back of the camera to connect the two devices
7
For a safe connection it is recommended not to leave the cable outside
the vehicle.
8
This devices uses infra red during night time. As it gets darker, the IR
will make images more clear.
LAMPA S.p.A. -
Via G. Rossa, 53/55 - 46019 Viadana (MN) ITALY - Tel. +39 0375 820700 - UNI EN ISO 9001:2008 Certified Company -
www.lampa.it
Operating temperature -20°C / 70° C - 90% humidity max
Storage temperature -30°C / 80° C - 90% humidity max
B
A
10m
MICROPHONE
NIGHT
vision
120°
PARASOLE
30/50m
IP69K
SUN
VISOR
Wireless
