WARNING! This set contains chemicals that may be harmful
if misused. Read cautions on individual containers carefully.
Not to be used by children except under adult supervision.
Color
Q
09/17 62063
PO Box 329 • Chestertown • Maryland • 21620 • USA
800-344-3100 • 410-778-3100 • 410-778-6394 www.lamotte.com
Order Code 2063
!
Insert tubes into ColorQ with line
and arrow facing forward.
!
”
Sun
“= Shade meter from
bright sunlight. Press/Hold
button to turn off.
!
”
Er7
“=Tube is misaligned or
scratched, or light chamber
is stained. See Users Guide for
more instructions.
!
Brush and rinse all tubes promptly
after use.
!
Allow tubes to dry before
returning to case.
!
Replace reagent caps securely.
!
If the unit should auto-off during
testing rinse and fill one tube to
Blank and return to testing.
!
Use only LaMotte replacement
reagents.
!
bAt = Battery is low.
For software Version 2.00 or higher
To ensure proper testing results:
UCL
NOTE: Wash and rinse tubes immediately after use. Tubes used for the
ultra high range test may become stained. Stain will not wash out. Stain
may fade if stained tubes and caps are placed in direct natural light or
sunlight. Designate tubes for use with the ultra high range test. Tubes can
be marked with a permanent marker. Blank and test must be done in the
same tube to eliminate error caused by stained tubes. Replace heavily
stained tubes.
INTERFERENCES: bromine, chlorine dioxide, iodine, oxidized manganese
and chromium, and ozone.
