15
GB
5.20 Using the fan
The fan is located in the middle of the hob with the extractor
facing downwards.
Important:
Do not put the cover onto the induction hob! Risk of
burning!
5.20.1 Switching the fan on and off
1. Press the standby key (approx. 1 s.).
2. Press the fan Plus key (1 s.).
You will then be able to select a power setting, 1,2,3 or 4,
by using the Plus or Minus key . The symbol for the
fan will light up.
3. Press the fan Minus key until 0 is shown in order to
switch fan off.
Hint
In order to ensure that extraction functions well with tall
cooking pots, you can place a wooden spoon under the lid of
the pot.
5.20.2 Fan time delay
The fan time lag is used after cooker in order to remove
cooking odours. The filter is also dried in the fan.
Setting the fan time delay
1. Press simultaneously the fan Plus key and Minus
key . The fan time lag of 10 minutes will be activated.
The symbol for the fan time lag will light up .
2. Pressing simultaneously again the Plus-
and Minus
key will set 60 minutes.
3. The time lag function is deactivated by pressing the two
keys simultaneously again.
The fan setting can be freely adjusted or changed when the
fan time lag is switched on.
5.20.3 Stop delay time
The fan motor should continue operating for another
10-20 minutes every time the hob has been used for cooking.
When the fan is switched off after having been in operation
for at least 15 minutes,
an automatic time delay at a low
setting will follow for around 15 minutes.
This guarantees optimal functioning and the removal of
remaining cooking steam.
When using a recirculating air filter, please always allow for
a stop delay time of 10 - 60 minutes in order to optimally
remove cooking odours.
When the fan is switched on again, in rare cases the odour
molecules present in the filter may be combined with steam
so that they are detected again. These remaining odours will
disappear when the fan continues to operate.
IMPORTANT
When the convection air mode is in operation, ventilation
must be sufficient in order for the air humidity to be removed.
Operation
