Lamona LAM9005, Инструкции и установка

Страница: 10 / 24

10 www.howdens.com
Warming Drawer
LAM9005 LAM9006
3. Installation
Before installation
Product must be installed by a
qualified person in accordance
with the regulations in force.
Otherwise, the warranty shall
become void. Manufacturer
shall not be held responsible for
damages arising from procedures
carried out by unauthorized
persons, and the product’s
warranty shall become invalid.
The customer is responsible
for the preparation of
the location at which the
warming drawer will be
installed and the necessary
electrical wiring.
CAUTION: The product
must be installed in
accordance with all local
electrical regulations.
CAUTION: Prior to installation,
visually check if the product
has any defects on it.
If so, do not have it installed.
Damaged products cause
risks for your safety.
Drawer frontal alignment
Appropriate
installation location
This product is designed to
be installed into commercially
available kitchen furniture.
A safety distance must be left
between the appliance and
the kitchen walls and furniture.
See figure (values in mm).
• Surfaces, synthetic laminates
and adhesives used must be
heat resistant (minimum 100°C).
• Remove the packaging
material and transport locks.
Do not install the product
next to refrigerators or
freezers. The heat emitted
by the product will increase
the energy consumption of
cooling appliances.
Maximum weight of
appliance fitted on top
of warming drawer is 50kg.
Appliances weighing
greater than 50kg can
cause damage to the
warming drawer.
Do not use the door and/or
handle to carry or move
the product.
To adjust VERTICAL alignment of
drawer frontal, slacken off 4 screws
on rear of frontal and retighten
when in desired position.