Lamona LAM6913, Инструкции и установка, Страница: 7 / 16

07_
04 - Operating Your Wine Cooler
The wine cooler will run continuously until
the required temperature range is achieved. This
is quite normal and not a cause for concern.
Once the wine cooler is running for a few
hours everything will be back to normal.
If the unit is unplugged, power lost, or turned off
it is recomended you wait 3 to 5 minutes before
restarting the unit.
Power on/off control
• When the appliance is plugged in to a power
outlet, it powers on automatically.
Interior light on/off control
• Touch the light symbol to turn the
interior LED light on/off.
• If the light is left on it will increase the
energy consumption slightly.
Temperature display window
• The number in the digital display reflects
the temperature selected for the cooler.
Temperature setting
• The temperature setting range is 5-2 0 ºC
• Directly touch the or to set the
temperature that you would like.
•
Touch the to increase the set temperature
by 1ºC and touch
the to decrease the set
temperature by 1ºC.
Operating your wine cooler
Touch the power symbol and hold for 10
seconds to turn the appliance on/off.
•
WATER LEAKAGE
If the door is not fully closed, the door seal is dirty
or distorted, or if the wine cooler is run only for
short periods of time, defrost water may overflow at
the rear.
Please avoid these situations.
User manual LAM691 3
This refrigerating appliance is intended to
be used at ambient temperatures ranging
between 16°C to 32°C.
If the ambient temperature is above or below
the recommended range (for example; extreme
hot or cold conditions) the temperature range
of 5°C to 2 0 °C may not be reached.
This appliance is intended to be used
exclusively for the storage of wine.
The most efficient use of the appliance is with
the shelves arranged in their standard array, fully
loaded with standard 75cl size wine bottles.
Select the appropriate temperature for the wine
being stored to ensure preservation and quality.
Leaving the door open for long periods of time,
turning the appliance on and off, running for
short time periods will all result in a higher energy
use and less than optimal storage conditions.
Energy Efficiency