Lamona LAM6913, Инструкции и установка, Страница: 11 / 16

_11
Adjusting the plinth cover
• The adjustable lower plinth cover is located
behind the plinth grille, and is held in position
by two screws.
• Loosen the two screws. Slide the adjustable
plinth down to cover the gap between the
wine cooler and the floor.
• Retighten the screws.
• The cover remains behind the grille.
Connection to the mains supply
Check that the voltage marked on the product
corresponds with your supply voltage.
This Appliance Must Be Earthed
The wires in the mains lead are coloured in
accordance with the following code:
GREEN / YELLOW – EARTH
BLUE – NEUTRAL
BROWN- LIVE
Earth
(Green / Yellow)
Neutral
(Blue)
Live
(Brown)
Earth
(Green / Yellow)
Neutral
(Blue)
Live
(Brown)
This appliance is fitted with a plug which has a
13 amp fuse. Should the fuse fail, then it must
be replaced with an ASTA approved fuse
(conforming to BS1362)of the same rating. If
you need to replace the plug or if the plug is
incorrect for your type of socket, remove it, and
replace it with an appropriate plug. Dispose of the
old plug safely.
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows: The
GREEN / YELLOW
wire is
the EARTH and must be connected to the terminal
which is marked with the letter ‘ E ‘ or by the earth
symbol
The
BLUE
wire is the
NEUTRAL
and must be
connected to the terminal which is marked with
the letter ‘N’ or coloured
BLACK
.
The BROWN wire is the LIVE wire and must be
connected to the terminal which is marked with
the Letter ‘L ’ or coloured RED .
Always ensure that the plug cord grip is fastened
correctly, if in doubt consult a qualified electrician
This product conforms to all current EU Directives.
Non-Rewireable Mains Plug
If your appliance is supplied with a non-rewireable
plug fitted to the mains lead, you will find that it
incorporates a fuse, the value of which is indicated
either on the base of the plug or on the fuse carrier.
Should the fuse need replacing, you must use an
ASTA approved one (conforming to BS1382) of
the same rating.
If the fuse cover is lost, the plug must not he used .
If you need to remove the plug, cut it from
the mains lead and immediately dispose of it.
Never attempt to re-use this plug or insert it into
a socket outlet as there is a very great risk of an
electric shock.
Connection to the mains supply
User manual LAM691 3