15
Exclusive to Howdens
Cleaning the door seals
Do not
use any oils or grease on the door seals, as
this will cause the seals to deteriorate and become
porous.
• The door seal should be cleaned regularly using a
mild detergent and clean cloth. Wipe dry using a
clean cloth.
• The door seals cannot be removed.
If the appliance does not operate when switched on,
check that:
• The plug is inserted properly into the mains socket
and that the power supply is on. (To check the
power supply to the mains socket, plug in another
electrical appliance).
• The fuse has blown/circuit breaker has tripped/
main distribution switch has been turned off.
• The temperature control has been set correctly.
• Rear wall of the larder fridge is wet - this is normal,
it freezes and then de-frosts.
• New plug is wired correctly if you have changed the
fitted moulded plug.
• Too much ice developing:
– Door not closed properly or open for long period
of time.
– Warm food being placed in larder fridge.
• Vibration noise:
– Bottles/jars in fridge making contact with each
other or touching the walls of larder fridge.
• Beeping sound:
– Door alarm - door not closed properly.
• Water at bottom of larder fridge
– Rear collection channel overflowing due to
blockage by item.
• Water on shelf:
– Stored item touching rear wall.
If the appliance is still not operating after the checks,
then call
LAMONA
Service Line.
Please ensure that the checks have been made as a
charge may be made if no fault is found.
Cleaning the ventilation void
A build-up of dust within the ventilation void will
increase the energy consumption of the larder fridge.
• The ventilation void should be cleaned regularly
using a soft brush and vacuum cleaner.
After cleaning
• Replace all the shelves and accessories.
• Reconnect to the mains socket and switch on.
• Place the food in the larder fridge and close the door.
4 - Problem solving
