11
Exclusive to Howdens
1
2
3
1
2
1
2
3
Defrosting larder fridge
The larder fridge defrosts automatically.
The defrost water runs to the drain tube via the
collection channel at the back of the fridge, see
image. During defrosting water droplets form at the
back of the fridge where the concealed evaporator is
located. Some droplets may remain on the liner and
refreeze when defrosting is completed.
Do not
use
pointed or sharp edged objects such as knives, forks
etc. to remove the droplets which have frozen.
If at any time the defrosted water does not drain
from the collection channel, check to see if the drain
channel has an obstruction. The drain tube can
be cleared by pushing the special plastic plunger,
provided, down the drain tube, see image. If there is
an ice build up, lower the temperature control to
1
for
a few hours until the ice melts, then return control to
normal setting.
Larder fridge shelf removal/adjustment
The shelves can be adjusted according to food
storage requirements.
Only remove/adjust the shelves when they are empty.
• Lift the front edge of the shelf,
1
and pull
forwards,
2
.
• Insert shelf at the desired height.
The raised edge on the protective strip at the back
must face upwards to prevent food touching the back
of the fridge and freezing to it.
Wine rack adjustment
• Lift the wine rack at the front edge,
1
and move
forwards,
2
to disengage the rear lug.
• Insert the wine rack at the required height. Ensure
that it is securely pushed back into place.
To set at an angle.
• Lift the wine rack at the front edge,
1
and move
forwards,
2
to disengage the rear lug,
3
.
• Insert the wine rack at the required height placing
the rear lug on the shelf height below. Ensure that it
is securely pushed back into place.
Do not
let large / heavy bottles drop into the wine rack.
