Lamona LAM4406, Руководство пользователя

Страница: 30 / 40

Removing the shelf supports
To clean the oven, remove the shelf supports.
CAUTION! Be careful when you remove the shelf supports.
1. Pull the front of the shelf support away from the side wall.
2. Pull the rear end of the shelf support away from the side wall and remove it.
2
1
Install the removed accessories in the opposite sequence.
The retaining pins on the telescopic runners must point to the front.
Catalytic cleaning
The cavity is coated with a catalytic enamel. It absorbs fat.
Before you turn on the Catalytic cleaning:
• remove all the accessories and removable shelf supports.
• clean the oven floor with warm water and mild detergent.
• clean the inner door glass with warm water and soft cloth.
1. Press again and again until the display shows "Cata" and the duration of the
cleaning (1 hour).
You cannot change the duration of the Catalytic cleaning. You can delay the start of the
cleaning with the function: END.
The signal sounds at the end of cleaning. The oven turns off.
2. Press any sensor field to stop the signal.
3. When the oven cools down, clean the cavity with a wet soft cloth.
Spots or discolouration of the catalytic coating have no effect on Catalytic cleaning.
Removing and installing the door
You can remove the door and the internal glass panels to clean it. The number of glass
panels is different for different models.
30