LAMONA
Appliances
08_
Safety
Safety when working with
electricity
•
Any work on electrical
equipment and systems
should only be carried out
by authorised or qualifi ed
persons.
•
In case of any damage,
switch off the product and
disconnect it from the
mains. To do this, turn off at
the fuse box.
•
The appliance must be
installed so that it can be
completely disconnected
from the mains easily after
installation by the isolation
switch.
•
Do not bend or trap cable
against hot surfaces during
install.
•
Make sure that fuse rating is
compatible with the product.
•
Do not switch the oven off
at the mains isolation switch
immediately after cooking.
Cooling fan continues to
run for up to 20-30 minutes
(approx) even after the oven
control is turned off.
•
Keep all ventilation slots
clear of obstructions, as this
may cause premature failure
of the oven element.
•
Do not allow the oven to cool
with the door open. Even if
the appliances door is only
open a little, front panels
of adjacent units could
become damaged over time.
Safety and cleaning
•
Do not use harsh
abrasive cleaners or sharp
metal scrapers to clean the
oven door since they can
scratch the surface, which
may result in the shattering
of the glass.
•
WARNING:
Ensure that
the appliance is switched off
before replacing the lamp
to avoid the possibility of an
electric shock.
•
Do not use oven light
for household room
illumination.
•
Do not use steam
cleaners for cleaning.
•
The appliance must not
be installed behind a
decorative door.
i
