24_
LAMONA
Appliances
Installation
1. The Oven is designed to fi t within a 720 x 600
aperture with a minimum depth of 575mm
2. Fit the two runners ‘A’ to each side of the oven
using the existing oven screws.
3. Align the two brackets ‘B’ with the top edge
of the of the cabinety and secure with the
screws provided setting the leading edge of
each bracket 50mm from the front edge of the
furniture. (as illustrated below).
4. Brackets ‘C’ and ‘D’ should be aligned with the
top edge of the cabinet positioned vertically
17mm back from front edge of the cabinet
doors. The notched edge should be towards
the top to allow clearance for the oven to slide
into position.
5. Lift and slide the oven into position on the
runners ‘A’ and ‘B’
6. Open the oven doors and secure the oven in
position through the x4 holes illustrated above.
Final check
Connect the appliance to the mains supply,
switch on the mains supply and check the oven’s
functions,
The clock time must be set in order for the
functions to work. Refer to initial use section for
further info.
A
B
C
x2
x2
x2
50mm
A
B
C
17mm
