Exclusive to Howdens Joinery.co
Page _ 7
User manual LAM2475 LAM2476
The Carbon Filters (Supplied Separately)
Carbon filters have a limited life. We advise you to change them when there is a noticeable drop in
performance. The intervals between changing the filter will depend entirely upon the amount of
cooking you do, but on average they will last about 3 months. Please quote the part reference number
HJA2906 (pack of 2) when reordering.
•
To gain access to the carbon filters, first of all remove the grease filters as above.
Remove the old filters and install new charcoal filters by placing the pin on the filter into the
rectangular hole, and rotate the filter to lock into place.
Refit grease filters and reconnect the power supply.
Open
Closed
NOTE:
The suction will be lower when installed in recirculation mode, this is normal and not a
product fault.
•
•
Replacing The Lamps
The lamps on this model are
service fix only and replacement
should be carried out by an authorised
service agent.
The extractor hood is fitted with one 1.5W LED lamps which will give many years of reliable service.
In the event of one of the lamps failing please call the service number.
The lamps on this appliance should only be used during operation of the cooker hood. They should not be
left on permanently and used as a main lighting source. The extractor is for domestic use only.
Before attempting to change or fit the charcoal filters ensure power to the extractor is
switched off.
Carbon filters only required for recirculation mode.
