Exclusive to Howdens Joinery.co
Page _ 15
User manual LAM2403-1
Decorative
Chimney
Fitting
Connect the extractor to the electricity supply (see electrical connections page). We recommend an
isolation switch that is accessible after installation.
The vent adaptor ‘4’ and outlet reducer ‘5’ maybe required depending on your chosen ducting method.
Fit the Appropriate ducting kit if venting externally.
Rest the chimney sections on the main extractor body and secure in position with bracket ‘7’
Next, extend the upper section to the ceiling and mark-up the position for the upper
bracket ‘6’.
lower the upper section, drill and the upper
bracket ‘6’ into position.
Secure the upper chimney section to bracket ‘6’ using the screws ‘9’ provided.
Finally
the grease
(**)
Please use rawl plugs and
screws appropriate to the type of
wall.
10.**
10.**
10.**
10.**
10.**
10.**
8.
8.
8.
8.
9.
9.
6.
7.
8.
9.
9.
