Lamona LAM2104, Инструкции и установка

Страница: 21 / 24

Page_21 Exclusive to Howdens
Troubleshooting
Technical Specification
TROUBLESHOOTING GUIDE
Symptons Possible Cause Solutions
Light functions but fan
does not • Motor temp has exceeded and thermal
fuse has tripped. • Switch off the hood and allow it to cool down and
the fuse will auto reset.
• Check the filter condition and clean or replace as
required.
Lamps fail to operate? • Lamps internal fault.
• Power is cut (hood will not function).
• Lamp has passed its usable life.
Call the authorised service agent.
Motor is on but fan does
not seem to be as efficient
as usual? • Clogged filters can reduce the
product’s efficiency. Check the grease
and charcoal filters (if fitted) also
ensure any venting is not obstructed? Replace any grease and carbon filters
The hood works
normally but smells linger? • Clogged filters can reduce the
product’s efficiency and may cause
unwanted smells. Replace any grease and carbon filters
Product does not operate? • The mains fuse maybe defective or
has tripped Check fuses in the fuse box. If necessary, replace or
reset them.
• Product is not connected properly. Check all power connections.
TROUBLESHOOTING GUIDE
Dimensions:
Total Wattage: 87W
Voltage: 220V - 240V 50Hz
Width: 600mm
Depth: 465mm
Height: 80mm
Your Cooker Hood is fitted with:
Single 85W motor
Push button control
3 Speed extraction
1 x 2W 3000K warm white LED
1 x Paper type grease filter LAM2099
Optional Extras:
Carbon filter: LAM2009
Ducting kits : APL 2805/6
If you cannot eliminate the problem after following the instructions
in this section, consult your depot or the Authorized Service Agent.
Never try to repair a nonfunctional product yourself.