Cupboard / hood clearances
Nominal width of the hob
90mm
Wall Unit
Wall Unit
400mm
No shelf or overhang of
combustible material should be
closer than 650mm above the hob.
90mm
400mm
min
650mm
worktop
Self adhesive seal
Apply the self adhesive seal to the underside edges of the hob glass. For best results, the seal should
be adhered along each side in turn, as close to the edge as possible, and trimmed at each corner, tak-
ing care to ensure a neat join.
SEAL
UNDERSIDE OF HOB
Conventional Installation
Refer to the installation bracket advice to determine your installation type. Place the hob in the aper-
ture, checking the hob glass is covering the work top along all four sides.
Set the front edge of the appliance parallel with the front of the work top.
inc cornice
inc cornice