13
Instructions and Installation
Clearances and dimensions
A
Minimum distance between
cabinets must be equal to
overall width of all hobs.
B
Minimum height to extractor
as recommended in extractor
instruction manual.
C
400mm minimum between
worktop and cabinetry within
170mm either side of the hob.
D
170mm minimum between
cut-out and vertical surface
above the worktop.
No shelf or overhang of
combustible material should
be closer than 650mm directly
above the hob.
There must be a minimum
clearance of 50mm between the
rear edge of the hob and the
rear wall. This clearance must be
maintained up to 650mm above
the worktop (unless otherwise
stated in your extractor manual).
The rear wall is any vertical
surface behind the hob. If any
tiles, backboards, splashbacks
or upstands are fitted the distance
is taken from the front face of
these items.
50mm min.
560mm(+2)
50mm min between hob and rear
wall (>60mm to cut out aperture)
A
B
C
D
490mm(+2)
