Lamona LAM1215, Руководство пользователя, Страница: 11 / 20

_ 11
User manual LAM1215
Installation
Clearances and dimensions requirements
560mm
50mm Min
55mm min
400mm min
490mm
Minimum distance
between carcasses must
be equal to width of hob
*
Minimum height to extractor
as recommend in extractor
instruction manual
*
50mm min between hob and rear wall
(>60mm to cut out aperture)
No shelf or overhang of combustible material should be closer than 650mm directly above the hob.
There must be a minimum clearance of 50mm between the rear edge of the hob and the rear wall. This
clearance must be maintained up to 650mm above the worktop (unless otherwise stated in your extractor
manual).
Place the hob in the aperture, checking the hob is covering the worktop along all four sides. Set the front
edge of the appliance parallel with the front of the worktop.
Secure the hob to the worktop by means of the brackets provided, taking the thickness of the worktop into
account. Your appliance will be supplied and installed using the following installation method.