Lamona HJA2339, Руководство по установке пользователя

Страница: 9 / 16

9
We recommend that at least two people install this extractor.
YOUR EXTRACTOR SHOULD ONLY BE CONNECTED TO YOUR
MAINS SUPPLY AFTER COMPLETION OF THE INSTALLATION
PROCESS
Before beginning the installation
• Check that there is a
double pole switched fused spur outlet
available for the
extractor that will be accessible once the extractor is installed. If the
product is to be used in ducted-out mode, there should also be space to
connect the ducting hose to the outside.
• If possible, disconnect and move freestanding or slot-in cookers from their
position, to provide easier access to the rear wall and ceiling. If this is not
possible, then a thick, protective covering should be placed over the
worktop, hob top or cooker; this will help to prevent damage to these
surfaces.
• Select a flat surface for removal of extractor bottom frame and cover the
surface with a protective covering.
• IMPORTANT: Please refer to the information on page 3 regarding
the minimum height required between the hob top and the
underneath of the extractor.
• The extractor is designed to be installed into a canopy housing at a
minimum height of 650mm above the hob unit.
• Installation