Lamona FLM8801, Инструкция пользователя

Страница: 21 / 28

21
Exclusive to Howdens
Fluff fil ters
Clean after
each cycle.
Problem Reason Solution
The drying process takes a
long time The surface of the lint filters might be clogged. Wash the filters with lukewarm water.
The ventilation grille on the front of the machine
might be blocked. Make sure the grille is not obstructed. Open doors/
windows to prevent the room temperature from
rising too much..
There might be a layer of limescale on the
humidity sensor. Clean the humidity sensor.
The dryer might be overloaded with laundry. Do not overload the dryer.
The laundry might be insufficiently spun. Select a higher spin speed on your washing
machine.
Laundry comes out damp at
the end of the drying process. The laundry that comes out hot at the end of the drying process generally feels more humid.
The programme used might not be suitable for the
type of laundry. Check the care labels on the laundry items, select
a suitable programme for the type of laundry and
additionally, use the time programmes.
The surface of the lint filters might be clogged. Wash the filters with lukewarm water.
The dryer might be overloaded with laundry. Do not overload the dryer.
The laundry might be insufficiently spun,. Select a higher spin speed on your washing
machine.
The dryer cannot be opened
or the programme cannot be
started. The dryer does not get
activated when adjusted. The dryer might not be plugged in. Make sure the plug is fitted in the socket.
The loading door might be open.. Make sure that the loading door is properly closed.
You might not have set a programme or pressed
the Start / Pause touch key.. Make sure that the programme has been set and
the dryer is not in standby (Pause) mode.
Child lock might be activated. Deactivate the child lock.
The programme has been
interrupted for no reason. The loading door might not be closed properly. Make sure that the loading door is properly closed.
There might have been a power failure.. Press the Start / Pause touch key to start the
programme.
Water tank might be full.. Empty the water tank..
Clothes have shrunk, felted or
deteriorated. The programme used might not be suitable for the
type of laundry.. Check the care labels on the laundry items. Select
a suitable programme for the type of laundry..
Water is leaking from the
loading door. There might be lint accumulated on the inner
surface of the loading door.. Clean the inner surfaces of the loading door and
the surfaces of the loading door.
The loading door opens on its
own. The door might not be closed properly. Push the loading door until you hear the closing
sound.
The water tank warning symbol
is on / flashing.
The water tank might be full Empty the water tank.
The water discharge hose might be bent. If the product is connected directly to the water
outlet, check the water discharge hose,
The filter cleaning warning
symbol is on. The lint filters might be unclean. Clean the filters.
The filter seat might be clogged by lint. Clean the filter seat.
There might be a layer that causes obstruction on
the surface of the lint filters. Wash the filters with lukewarm water.
The programme cannot be
started and the filter warning
LED is blinking. The filter may not be placed. Clean the heat exchanger.
The filter warning LED is blinking even through the
filter is in place. Call for technical service.
CAUTION: If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the
Authorised LAMONA Service Agent. Never try to repair a non-functional product yourself.
Problem solving
Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be
saved because a service call will not be required.
The following guide may help you to find the reason for a malfunction or a fault, and to correct.