Lamina Nixie Clock Lamina Nixie, Руководство по эксплуатации

Страница: 5 / 26

Quick start your Lamina Nixie Clock
Indicator lights
Connect the power and plug in the clock. It shows 6-5-4-3-2-1
numbers on the nixie tubes.
Press and hold the SET button for 2 beeps to start the clock. It will
show 09:00:00 as the time, and 01.01.13 as the date. This is the initial
start time.
From this point you can set the clock manually.
Press and hold the SET button for 2 beeps to set the date and time.
The year will be highlighted first, set it to current with the ADJUST
button.
Press one more time the SET button to go to the month. Pressing the
ADJUST button set it to current than step forward to the day and set
it, press SET again to go to the hour and minute to adjust.
The seconds could be zeroed in a same way.
The “hour’” must set by using 24 hours format. (settings only)
To EXIT, press and hold the SET button for 2 beeps.
- 6 -
Wi-Fi/GPS sync enabled/disabled Alarm ON/OFF