Lamina Nixie Clock Lamina Nixie, Руководство по эксплуатации

Страница: 15 / 26

You may leave the clock now. Use your laptop, computer, tablet,
mobile phone to connect to the clock. Look for SSID (Wi-Fi network)
Lamina-Nixie-Clock and connect.
It will ask for the password: laminanixie
Wait for connection and open your web browser and go the following
address (without www or http://...only these numbers without space)
192.168.8.1
and hit enter. You see a login/configuration page to connect your
Lamina Nixie Clock to the 2.4 GHz wireless network.
Enter your SSID (network name) and your network password. Press
Enter/Submit.
Now your clock can connect to your own network to synchronize the
time. Pay attention to enter the required information accurately.
Now go back to your clock for further settings. Press SET button once
to go to parameter #30.
The clock synchronized to the UTC/GMT time, which is in most cases
not your current local time. At this parameter you can set the offset
hours of your location from UTC/GMT time zone. E.g.: New York is -6
hours from GMT at day light saving period (DST), in this case the value
would be 6.
There is no offset minutes, skip parameter #31, go to parameter, #32
to set the direction of the offset hour positive or negative. For New
York you need the negative, set the value to “1”.
How to check your offset hours/minutes?
Just type to your internet browser: “Current Local Time” and you will
see the current time at your location, including the GMT offset hours.
- 16 -