LAMI Freesia 55C, Инструкция по эксплуатации

Страница: 14 / 18

13
Only cut the release paper on the laminate film and rotate the laminate roller until the cross section of the release
paper cut touches the re- winding paper tube.
Here, hold the release paper so that it does not get entangled.
When the release paper touches the re-winding paper tube, attach it using cellophane tape to finish installation.
【
4
】
Use the winding device.
If the optional re-winding device is used, install the device according to the following sequence.
Attach the laminated product to the re-winding paper tube using tape. The motor starts rotating and winding
once the re-winding device switch is turned ON.
The re-winding device switch can be controlled to forward or reverse rotation.
When the switch is turned to
ᅳ
direction, the re-winding device rotates in direction
①
.
When the switch is turned to ○ direction, the re-winding device stops rotation.
When the switch is turned to
ᆖ
direction, the re-winding device rotates in direction
②
.
Caution
The re-winding device (optional) can be winded up to 50 m (about 30 kg).
Standard for the product of our company:
Under-film
【
PET 12
µ
1400 mm
】
Laminate film
【
PVC 80 µ 1350 mm
】
Media
【
PVC 80 µ 1370 mm
】
During cold processing, winding is about 30 kg at 50 m.
Under-film
Laminate film
Release liner re-winding paper
tube.
Release liner
l