LAMBRECHT meteo
|
AEM
|
METEO-LCD 14742
aem.eco
page
–
6
7.1
How to use the menu
In the bottom line the buttons are designated to continue the
menu or to leave it. Pressing the „MENU“ button a display
similar as mentioned in the chapter above -level 2- appears.
A cursor „>“ on the left side of the menu-point shows the sub-
menu which can be selected now.
When pressing the set-button the cursor moves to the param-
eter which can be changed now using the „arrow-up“ [
] and
„arrow-down“ [
] buttons. Pressing the „SET“ button again
the cursor returns to the left side of the display.
The asterisk (*) behind the wind mode indicates another menu
below. To get back to the next higher level move the cursor
to the „BACK...“ position and press the „SET“ button. When
moving the cursor to the „EXIT“ position and pressing the
„SET“ button indicator returns to the normal display mode.
In case the below mentioned DUAL mode is selected
the „SET“ button has to be pressed longer than
3 seconds to get to the described display. More
details about this special mode are described in the
clauses hereafter.
7.2
System Information and entrance to
menu
This display indicates specific data of the integrated firmware
version. In case of queries with the indicator this information
will help our service department for supporting the user.
7.3
Setup menu „SYSTEM SETUP 1“
7.3.1 Brightness and contrast
As a default setting both parameters are set to 50 % when
the indicator gets delivered from the factory. All later settings
will be stored internally with a data-hold function (memory)
and available again when switching on the indicator again.
Details of these settings are described in a following chapter.
7.3.2 Operation modes
In this mode the below mentioned parameters can be indi-
cated depending on the indicator model:
7.3.2.1 Wind speed and direction „WIND *“
The asterisk (*) behind the WIND mode indicates further avail-
able parameters to be selected in the next lower level of the
menu. When selecting this item the Setup menu „SYSTEM
SETUP 2“ appears. Details are described hereafter.
7.3.2.2 Meteorological data „MET“
In this mode the meteorological parameters air temperature,
relative humidity, barometric pressure and dew point tempera-
ture will be indicated as a digital indicator.
7
The setup menu
The structure of the operating menu is mentioned in the tables
below. When leaving the normal display mode i.e. when
pressing the SET button the first time a reaction may last
up to 2 seconds. Than all responds will appear immediately.
Level 1
Operational mode
Selectable items:
Setup Mode & System Info:
www.lambrecht.net
METEO-LCD
V 1.30 20.10.2003
EXIT
MENUE
EXIT: back to operational mode
MENU: to the setup menu
Level 2
Operational mode
Selectable items:
Setup Menu:
SYSTEM SETUP 1:
BRIGHTNESS: 50 %
CONTRAST:
50 %
>OPERAT. MODE: WIND *
BAUDRATE: 4800
LANGUAGE: ENGLISH
EXIT...
0...100 %
0...100 %
WIND*/ MET/ DUAL/ NAV3
4800 9600 19200 38400
ENGLISH / DEUTSCH
•
For access to the various parameters press SET but-
ton.
•
An asterisk (*) indicates another present menu in the
next level.
•
Back to the operational mode: move the cursor to the
EXIT position & press the SET button.
Level 3
Operational mode
Selectable items:
Setup Menu:
SYSTEM SETUP 2:
PROTOCOL*: MWD
WIND.S UNIT:
KN
>MEAN VALUES: 2 MIN
PRESAMPLES: 1
VIEW MODE**: TRUE
BACK...
MWD / MWV*
KN / M/S / MILES
2 MIN / 10 MIN / – – –
1 ... 5
TRUE / REL**
•
Back to the next higher level: move the cursor to BACK
position & press SET button.
•
Back to the operational mode: move the cursor to
„EXIT“ position & press SET button.
•
Remark: In case the dual mode is selected the SET
button has to be hold longer than 3 seconds to get ac-
cess to the menu.
*) In the “NAV3“ operating mode, the protocol is
permanently set to “MWD“.
**) In the “NAV3“ operating mode, the display is
permanently set to “True”.
