Lambrecht aem 8121, Руководство пользователя, Страница: 5 / 7

aem.eco
LAMBRECHT meteo | AEM | 8121
page – 5
The jumpers (bridges) location on the printed circuit board is depicted in the parts placement pattern below.
Numbering in this picture is the same as in the table on page 4.
Electrical Connection
For electrical connection it is recommended to use cable type AWG 20 resp. 16 or equivalent.
Core AWG color code Function
1 black blk (+) Power Supply (V+)
2 brown bn GND
3 red red (+) Signal-Output
4 orange ora GND
Electric Terminal: 6 pole female clamp connector for solid wire or cord with end sleeves, suitable for wire cross
sections of 0.5...1.5 mm
2
.
Position of jumpers