LAMBORGHINI R3 EVO 85, Руководство по ремонту

Страница: 6 / 61

VI
ConTEnTs
30.3.12 - Measuring piston protrusion 30-42
30.3.13 - Valve assembly and disassembly 30-45
30.3.14 - Valve check 30-50
30.3.15 - Check the valve guide 30-51
30.3.16 - Replacing the valve guide (oversized - cast) 30-52
30.3.17 - Check the valve residual 30-56
30.3.18 - Replacing the lined valve seat (oversized) 30-58
30.3.19 - Check the endfloat of the crankshaft 30-64
30.3.20 - Check the crankshaft 30-69
30.3.21 - Replace the crankshaft O-ring (flywheel end) 30-72
30.3.22 - Replacing the crankshaft O-ring (opposite end to flywheel) 30-76
30.3.23 - Check the connecting rod drum 30-80
30.3.24 - Fitting and removing piston pin bush 30-88
30.3.25 - Assembly and disassembly of the crankshaft 30-93
30.3.26 - Fitting and removing counterweight shafts, checking 30-100
30.3.27 - Disassembly and assembly of the piston and connecting rod drum 30-107
30.3.28 - Check the piston 30-113
30.3.29 - Check the piston rings and piston grooves 30-115
30.3.30 - Assembly and disassembly of piston cooling nozzles 30-119
30.3.31 - Removal and refitting of the crankcase breather 30-120
30.3.32 - Check the cylinder 30-122
30.3.33 - Removal and refitting of the front cover (opposite end to flywheel) 30-123
30.3.34 - Disassembly and assembly of the connector box 30-128
30.3.35 - Fitting and removing the camshaft bearings, checking 30-130
30.3.36 - Disassembly and assembly of the gear case cover 30-135
30.3.37 - Assembly and disassembly of the camshaft 30-139
30.3.38 - Check the camshaft 30-143
30.3.39 - Removal and refitting of the rotation device 30-144
30.3.40 - Removing and fitting the V-belt pulley 30-146
30.3.41 - Fitting, removing, checking and setting adjuster rod 30-148
30.3.42 - Removal and refitting of the heater 30-153
30.3.43 - Removal and refitting of the turbocharger 30-155
30.3.44 - Removal and refitting of the charge air duct 30-159
30.3.45 - Fitting and removing injection pump 30-163
30.3.46 - Determine the thickness of the shim (engine without injection advance variator) 30-175
30.3.47 - Determine the thickness of the shim (engine with injection advance variator) 30-177
30.3.48 - Determination of the overall dimensions of the injection pump (engine without the
injection advance variator) 30-179
30.3.49 - Determination of the overall dimensions of the injection pump (engine with the injection
advance variator) 30-183
30.3.50 - Fitting and removing injection valves 30-188
30.3.51 - Checking the injection valves 30-192
30.3.52 - Removal and refitting of the fuel lift pump 30-196
30.3.53 - Removal and refitting of the oil pickup pipe 30-198
30.3.54 - Removing and fitting the lubricant oil sump pan (cast iron lubricant oil sump) 30-199
30.3.55 - Disassembly and assembly of the lubricant oil sump (lubricant oil sump-plate) 30-203
30.3.56 - Removal and refitting of the oil cooler 30-208
30.3.57 - Disassembly and assembly of the oil radiator housing 30-211
Find manuals at https://best-manuals.com