LAMBORGHINI R3 EVO 85, Руководство по ремонту

Страница: 5 / 61

V
ConTEnTs
20.2 - Diagnostic tool screens 20-14
20.2.1 - ECU interrogation 20-14
20.3 - Commissioning and calibrating the tractor 20-17
20.3.1 - Digital instrument calibration 20-17
20.3.2 - Renewal of the shuttle ECU - Introduction (R3 EVO 100 -> 20001, R3 EVO 110 -> 1001,
R3 EVO 85 -> 20001) 20-22
20.3.3 - Renewal of the shuttle ECU - Initialisation of the ECU (R3 EVO 100 -> 20001, R3 EVO
110 -> 1001, R3 EVO 85 -> 20001) 20-22
20.3.4 - Renewal of the shuttle ECU - Line end programming (R3 EVO 100 -> 20001, R3 EVO 110
-> 1001, R3 EVO 85 -> 20001) 20-25
20.3.5 - Renewal of the shuttle ECU - Introductory notes (R3 EVO 100 -> 20001, R3 EVO 110 ->
1001, R3 EVO 85 -> 20001) 20-32
20.3.6 - Renewal of the shuttle ECU - Automatic calibration (R3 EVO 100 -> 20001, R3 EVO 110
-> 1001, R3 EVO 85 -> 20001) 20-33
20.3.7 - Renewal of the shuttle ECU - Manual calibration (R3 EVO 100 -> 20001, R3 EVO 110 ->
1001, R3 EVO 85 -> 20001) 20-35
20.3.8 - Renewal of the shuttle ECU - Editing the comfort parameters (R3 EVO 100 -> 20001, R3
EVO 110 -> 1001, R3 EVO 85 -> 20001) 20-41
20.3.9 - Renewal of the shuttle ECU - Calibration of the clutch pedal (R3 EVO 100 -> 20001, R3
EVO 110 -> 1001, R3 EVO 85 -> 20001) 20-42
20.3.10 - Renewal of the engine ECU - Introduction 20-45
20.3.11 - Renewal of the engine ECU - Calibration of the accelerator pedal 20-45
20.3.12 - Renewal of the engine ECU - Calibration of the hand throttle lever 20-48
20.4 - ECU alarms 20-51
20.4.1 - Key to the “ECU alarms” tables 20-51
20.4.2 - FMI code 20-52
20.4.3 - Engine alarms 20-52
20.4.4 - Transmission alarms 20-61
20.4.5 - Instrument panel alarms 20-66
30 - mEThod of InTErVEnTIon
30.1 - Tools for engine disassembly and reassembly 30-2
30.1.1 - Commercially available tools 30-2
30.2 - Workshop tools for engine disassembly and reassembly 30-6
30.2.1 - Workshop tools for engine disassembly and reassembly 30-6
30.3 - B0 - Engine 30-13
30.3.1 - Air conditioning compressor drive belt 30-13
30.3.2 - Tension adjustment of the fan and air conditioning compressor drive belt 30-13
30.3.3 - Alternator, fuel pump and water pump drive belt 30-14
30.3.4 - Tension adjustment of the alternator, fuel pump and water pump drive belt 30-15
30.3.5 - Compression test 30-15
30.3.6 - Assembly and disassembly of the engine on the assembly stand 30-18
30.3.7 - Adjustment of valve clearance 30-22
30.3.8 - Removal and refitting of the rocker arms and pedestals 30-26
30.3.9 - Disassemble and complete the rocker and support, check 30-29
30.3.10 - Disassembly and assembly of the cylinder head 30-32
30.3.11 - Grinding the cylinder head seal surface 30-39
Find manuals at https://best-manuals.com