LAMBORGHINI ECO 15, Руководство по установке и обслуживанию

Страница: 36 / 40

36
UK
PIPE FILTER - POSITIONING FAN
Close the fuel aspiration gate and, depending on the type, proceed with thorough clea -
ning of the filtration component. To check whether the air gate fan is clean or to check
the combustion head proceed as follows:
- Remove the cover (23) by loosening the screw (22).
- Loosen the lower screws (32) completely.
- Loosen the central screw too.
- Parzially loosen the upper screws (14) too.
- Release by raising the component support plate (34) and hook it in its seat as illustra -
ted in fig. 16.
Doing the above provides the conditions needed to check whether the internal burner
parts are clean and, where necessary, to replace the motor-fan unit. When re-assem -
bling make sure that you observe the gap illustrated in fig. 15.
WARNING: in the event of a dangerous situation cut power by turning the main switch
to OFF and stop fuel flow via the relative gate.