Lamborghini Caloreclima ERA 31 BS 130, Руководство по установке и обслуживанию

Страница: 38 / 108

38
SETTING CURRENT TIME AND DATE
The system for setting current hour/minutes and date is actuated through the quick pressure (less than 3 sec.)
of the button. Every time is pressed, hour, minutes and date blink, and they can be edited pressing
and . The clock has a 7 days autonomy in case of power failure, and autonomy is reset after at least
one day of operation. Protected data, operating parameters and all time intervals reside on Eeprom, with a 10
year guarantee.
SETTING TIME INTERVALS OF HEATING AND HOT WATER HOUR/DATE COUNTERS
It is possible to program a heating control hour/date counter, consisting of 14 (0
÷
13) time intervals, comprising:
- ON start hour and minutes;
- ON (OFF) end hour and minutes;
- day or days of the week for which the interval is valid;
- a similar hour/date counter for Hot Water, consisting of 6 (0
÷
5) time intervals.
The hour/date counter programming step can be actuated by pressing for at least 3 sec
.
The selection
of the type of hour/date counter to be programmed occurs right after pressing for at least 3 sec. In
fact, the symbol blinks, and with and you can select the symbol (hour/date counter
for hot water), or reselect (hour/date counter for heating system control). Once you have performed
the above selection, with the button, the interval number, “0”, starts blinking in the symbol.
During programming, each interval is highlighted by a progressive number into a shaded box. Select the
interval (among the 14 available) to program with and and press again. The interval start
hours blink, and the ON symbol lights up: set the correct hour with and . Press
again to set the minutes with and Press again. The hours start blinking to request the
interval end, and the OFF symbol lights up. Set the OFF hours and minutes repeating the above procedure.