19
GB
• Introduction
Dear Costumer,
Thank you for choosing a burner featuring advanced design, cuttingedge technology, high reliability and
quality construction.
ECO P is a pellet burner wose compact size and original design make it suitable for use with the ma
-
jority of solid fuel-burning boilers avaliable on the market. The care taken in its design and industrial
production has resulted in a well-balanced product offering high efficiences, low CO and Nox emissions
and very quiet flame.
• Control panel
Display
The dispay shows various information, depending on the set operation method.
There are 3 operation method:
. A
= Burner management (default setting)
. B
= Burner management (Second internal clock or contact)
. C
= Burner management (Second internal clock or contact)
OPERATING INSTRUCTIONS
Fig.1 - Control panel
Fig.1
Method A
Methods B and C
1
Day/time setting button
2
Operation mode selection button
3
Override button - Pellet load button
4
- button
5
Programming / reset button
6
+ button
7
Display
8
Automatic mode symbol
9
Programming Menu symbol
10
Burner lighting request symbol
11
Not used
12
Multifunction symbol:
•in Automatic mode, it indicates when the programmer clock is in the request band
•if Automatic mode was not selected it indicates Manual On mode
13
Override symbol
14
Deactivated symbol
Day symbol
15
Deactivated symbol
Setting symbol
16
Heating sensor temperature
Current time
17
°C symbol
Current minutes
18
Actual burner power
1 = Minimum
5 = Maximum
O/FH = During Pre-ventilation/Post-ventilation
6 = During Post-ventilation2
Day of the week
19
Burner On