Lamborghini Caloreclima Connect CRP, Инструкция по установке и эксплуатации, Страница: 101 / 376

101
EN
cod. 3542B390 - Rev 00 - 06/2022
5.9 DATE AND TImE SETTING
1. Follow the path
“MENU >> SETTINGS >> DISPLAY >> TIME & DATE”
2. Use the and buttons to change in sequence:
a. hours b. minutes c. day d. month e. year
3.
Confirm the new values entered with the button.
It is possible to enable the summer time function for automatic switching from winter time to summer time.
To activate the “DAYLIGHT SAVINGS TIME” function:
a. Follow the path
“MENU >> SETTINGS >> DISPLAY >> DAYLIGHT SAVINGS TIME”
b. Use the and buttons to select “FUNCTION ACTIVE” and confirm with the button.
c.
Using the and buttons select “CONFIRM” and press the button .
5.10 WIFI SETTING
NOTE To remotely manage the Connect CRP via the app “Lamborghini CRP” it is necessary to have a WiFi
network with an Internet connection to which it can be connected.
To connect the device to the network, proceed as follows:
1. Follow the path:
“MENU >> SETTINGS >> WIFI >> AP MODE”
After pressing the button on “AP MODE”, go back
to the main screen and check that “AP” is present in the
“WIFI SIGNAL STRENGTH” area.
fig. 56
2. Read the MAC Address code on the data label affixed to the device and make a note of the last four characters.
3. From a cell phone with WiFi function activated, connect to the network called MilkyWay_XXXX where XXXX are
the last four characters of the MAC Address obtained from the previous point.
NOTE No password is required to access the network.
4.
Access the page
http://192.168.1.1.
from browser.
5. In the SSID and Password field, enter the network information.
fig. 57 fig. 58
NOTE In the List box is the list of networks that the Connect CRP has identified. Press on a network and the
SSID field will be automatically filled in with the name of the selected network.
6. Press on “CONFIGURE WIFI NETWORK (STA)” to
confirm the information entered.
fig. 59