LAMBERT 6D10D200A, Руководство пользователя

Страница: 3 / 24

LAMBERT POWER Diesel Engine Operation and Maintenance Manual
3
User’s Instructions
1. Engine operators must carefully read this Operation and Maintenance Manual to
familiarize its structure and strictly follow the technical operation method and maintenance
schedule.
2. When running new engine, we must carry out 60 hrs trial run as specified in this
Manual. Idle or high speed no-load operation is strictly prohibited.
3. After engine is started at cold state, speed must be increased gradually. Never increase
the speed suddenly or make engine run at idle speed for a long time.
4. After engine stops, if the environment temperature is possible to be lower than +5
℃
,
and no anti-freeze is added. The water in radiator and engine must be drained off.
5. Never run the engine without air filter to prevent un-filtered air going into cylinders.
6. When adding fuel and oil, choose the specified grade and use special clean containers.
The fuel and oil must be filtered by screen. And fuel must be precipitated over 72 hours.
7. Before each start, check coolant level and oil level.
8.The electronic part must be checked by personel with electric knowledge.