- 5 -
Using the LAMAX X9.1 action camera
1. INSERTING A MICROSD CARD
Only insert or remove a microSDHC or SDXC card (U3 recommended) from the microSD card
slot when the camera is switched off and not connected to a computer.
CAUTION:
Use only branded microSDHC or SDXC cards. Cards from generic manufacturers do
not guarantee correct data storage function.
2. INSTALLING THE BATTERY
a) Slide out the battery door on the bottom of the camera. It should open automatically.
b) Insert the battery into the bay connector first, so it aligns properly.
c) Close the battery door.
3. CHARGING
a) Camera can be charged by connecting to a PC or using a network adapter.
NOTE:
network adapter is not included. The charging current when charging via USB and
network adapter is 580 mA. If the computer output current is 400 mA, charging via computer
and USB will be 400 mA.
b) In a vehicle, the camera can be charged using a cigarette lighter adapter.
c) Whilst charging you can still shoot video or take photos (except when charging via PC).
d) Camera may also be charged when turned off.
WARNING:
Never charge unattended. If device overheats, produces smoke or a suspicious
odour when charging, immediately unplug and stop charging. Do not charge battery using fast.
charging adapters. Current greater than 5V may damage the camera.
4. TURNING THE CAMERA ON AND OFF
a) To turn camera on, press and hold the “M” button for 3-5 seconds.
b) To turn camera off, press and hold the “M” button for 3-5 seconds.
5. SWITCHING MODES AND NAVIGATING THE MENU.
Tapping the “M” button toggles between the modes: video / photo / video and photo gallery /
settings.
EN
EN
DE
DE
CZ
CZ
SK
SK
PL
PL
HU
HU
HR
HR
LT
LT
LT
LT
