Lamax Electronics LAMAX C9, Руководство пользователя

Страница: 3 / 99

- 2 -
3. Installing the Device
1) Guide the power cable around the windscreen to the car cigarette lighter so as not to
obstruct the driver’s view and fasten it securely. To achieve the optimal shot, attach the
device between the glass and the rear-view mirror.
2) Do not install the device in a position which obstructs the driver’s view or that may distract.
3) Some vehicles do not cut power to the cigarette lighter when the engine is off. In this case,
unplug the cable from the cigarette lighter before exiting the vehicle.
4) When using the device for the first time, the battery may be low. If you cannot switch on the
device due to low power, manually connect the external power cable to charge the battery.
5) Use only a high-quality microSD card of class 10 or higher. For optimal recording use, we re-
commend using cards with a capacity of at least 8GB up to a maximum of 64GB. If this is the
first use of the card, we recommend formatting it first..
Important Notice:
- For proper operation the LAMAX C9 and GPS module, the power cable must be plugged di-
rectly into the micro USB port of the GPS holder (not into the micro USB port on the camera).
- To ensure the camera functions properly, it must be plugged securely into the holder (the
camera must be snapped into the holder and be fully inserted). When removing the camera,
it is necessary to press the safety lock at the front of the holder and then carefully pull the
camera out. If the camera is not fully attached to the GPS module, there may be disruptions to
the power supply or GPS operation.
4. Using the LAMAX C9 Dashcam
1) Inserting a MicroSD Card
Insert or remove the microSD card when the camera is switched off and not connected to a
computer or power supply.
2) Charging
a) Camera can be powered by both a USB cable or a car charger plugged directly into the car
cigarette lighter.
b) Camera is designed to be powered continuously. Integrated battery cannot be removed or
replaced.
3) Turning the Camera On and Off
a) Turn the camera on by pressing the ON/OFF button.
b) Camera automatically turns on when connected to the power supply.
c) Turn the camera off by pressing and holding the ON/OFF button for 3-5 seconds.
d) Camera automatically turns off when disconnected from the power supply.
4) Switching Modes and Menu Navigation
a) Tap the MODE button to toggle between modes: video mode (live view) » photo mode »
video gallery/photo gallery » entry lock.
b) The camera menu is divided into three parts: database menu » basic camera settings »
advanced settings. Navigate between these parts using the UP and DOWN arrows. To enter
the menu press the MENU button. In each individual section of the menu, move vertically
using the UP and DOWN arrows and press OK to confirm the selection.
c) Video / photo settings can only be accessed from the appropriate mode. This means you can
only access video settings from video mode and photo settings from photo mode.