i
Important Safety Instructions
Before using this equipment read all manuals and other documents related to this unit and other equipment
connected to this unit. Always have a copy of a units manual on file nearby, in a safe place; if a replacement
copy of a manual is needed it can be found at the www.lamarchemfg.com.
Electrical Safety
WARNING:
Hazardous Voltages are present at the input and output of power systems.
When working with any live power system, follow these precautions:
•
Never work alone on any live power system, someone should always be close enough to come to your aid
•
Remove personal metal items such as rings, bracelets, necklaces, and watches.
•
Wear complete eye protection (with side shields) and clothing protection.
•
Always wear gloves and use insulated hand tools.
WARNING:
Lethal Voltages are present within the power system. Parts inside the unit may still be
energized even when the unit has been disconnected from the AC input power. Check with a meter
before proceeding. Do not touch any uninsulated parts.
•
A licensed electrician should be used in the installation of any unit.
•
Always disconnect the unit from the supply, batteries and loads before performing maintenance or cleaning.
•
If the unit is hot-swappable, simply remove it from the shelf for any maintenance or cleaning.
•
Always assume that an electrical connection is live and check the connection relative to ground.
•
Be sure that neither liquids nor any wet material come in contact with any internal components.
•
Do not operate this unit outside the input and output ratings listed on the unit nameplate.
•
Do not use this unit for any purpose not described in the operation manual.
Mechanical Safety
•
This unit or parts of the unit may get very hot during normal operation, use care when working nearby.
•
Do not expose equipment to rain or snow. Always install in a clean, dry location.
•
Do not operate equipment if it has received a sharp blow, been dropped, or otherwise damaged in any way.
•
Do not disassemble this unit. Incorrect re-assembly may result in a risk of electric shock or fire.
Unit Location
•
Allow at least 6 inches of free air on all vented surfaces for proper cooling.
•
Allow sufficient clearance to open the front panel for servicing.
•
Do not operate this unit in a closed-in area or restrict ventilation in any way.
Check for Damages
Prior to unpacking the product, note any damage to the shipping container. Unpack the product and inspect the
exterior of product for damage. If any damage is observed, contact the carrier immediately. Continue the
inspection for any internal damage. In the unlikely event of internal damage, please inform the carrier and
contact La Marche for advice on the risk due to any damage before installing the product. Verify that you have
all the necessary parts per your order for proper assembly.
