background image

Shore Ramp PWC-50     p/n: 000004 rev A 

doc: 400005 copyright© 2018 Lakeside Recreation, LLC

 

Parts List 

Part Number 

Qty 

Description 

100001 

18 

Wheel, 5 x 2 Polyolefin 

100002 

Which with Strap 

200015_A 

Keel Beam M4 

200016_A 

Front Beam M4 

200017_A 

Connector Plate M4  

200010_F 

16 

Axle Shaft 

200003_C 

Front Foot 

200005_C 

Rear Foot 

200006_B 

Spacer 

200018_D 

Winch Strut M4 

200011_B 

Short Axle Shaft 

600002 

Roller, 2.5 x 3.75, Rubber 

300022 

Cap-Plug 2.00 x 3.00 

300001 

34 

Cotter Pin, 5/32 x 1.25 Stainless 

300005 

Bolt, 3/8-16 x 3.25 Stainless 

300018 

Bolt, 3/8-16 x 5.0 Stainless 

300007 

18 

Bolt, 3/8-16 x 1.00 Stainless 

300008 

24 

Nut 3/8-16 Nylock, Stainless, Waxed 

300009 

48 

Washer 3/8 Stainless 

300013 

Washer ¾ AN Stainless  

300021 

Anti-Seize Packet 

300014_A 

Nameplate PWC-50 (affixed to Winch Strut) 

400005 

Instructions for Shore Ramp PWC-50 M4, Printed 

400004 

Label for Box for Shore Ramp PWC-50 M4, Printed 

300023 

Shipping Box M4 

 
One Year Limited Warranty 

LAKESIDE RECREATION products are warranted to be free from defects in materials or workmanship for one (1) year from the date 
of purchase. Within this period we will provide a replacement for any component that fails in normal use. Such replacement will be 
made at no charge to you, provided that you shall be responsible for any shipping charges and labor for replacement of the component.  
Replacement products or components may be new or refurbished at the sole discretion of LAKESIDE RECREATION. 

This warranty does not apply to: (a) cosmetic damage, such as scratches, nicks, stains and dents; (b) damage or loss caused by 
accident, abuse, misuse, or other acts of nature or external causes; (c) damage or failure due to improper assembly, improper 
installation, overloading beyond rated capacity, or use for purposes not intended; (d) damage to a product resulting from modification 
or alteration.  Determination that damage or failure is not due to defects in material or workmanship and is therefore not covered under 
this warranty shall be at the sole discretion of LAKESIDE RECREATION. 

To make a warranty claim, contact LAKESIDE RECREATION via the warranty claim link on 

www.lakesiderecreation.com

 and 

provide a description of the failed component and your contact and shipping information.  LAKESIDE RECREATION at its sole 
discretion may require photographic documentation of the failed component; require the failed component to be returned for 
inspection; and/or require the failed component to be returned in exchange for the replacement component.  Returned components 
shall be become the property of LAKESIDE RECREATION when a replacement component is provided.  Please do not return any 
products or components without prior authorization.  LAKESIDE RECREATION shall not be responsible for any shipping charges 
for any component or product returned to us, nor for any shipping charges to return back to you any component or product.   

THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER 
WARRANTIES EXPRESS, IMPLIED, OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY 
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE.  Subject to 
applicable law, in no event shall our liability exceed the purchase price of the product. 

Содержание PWC-50 M4

Страница 1: ...pply a dab of the supplied anti seize compound to the threads of each stainless bolt prior to assembling the nut Assembly 1 Unpack the box and confirm that all the parts are present according to the parts list 2 Lay the Keel Beam and Front Beam on a flat surface end to end with the bottom access openings facing up Assemble them together using the 2 Connector Plates and 16 sets of 1 00 3 8 16 bolts...

Страница 2: ...holes on each side with the short dia section protruding out the other side Secure by inserting the cotter pins and bending 7 Slide 16 Wheels onto the Axle Shafts Secure by inserting the cotter pins and bending 8 Assemble the Winch Strut to the Front Beam by inserting it into the front notch and aligning the holes Aligning the holes in the two parts and inserting the 5 0 long 3 8 16 bolts may take...

Страница 3: ...his may be easier with two people As the watercraft comes up and over the first roller confirm the watercraft is not rubbing on the Shore Ramp Wind the winch until the watercraft is pulled all the way up the ramp IMPORTANT Do not operate your watercraft in the shallows or attempt to power it up the ramp as the PWC s impeller will be damaged by sand and rocks pulled in from the bottom Always float ...

Страница 4: ...uch as scratches nicks stains and dents b damage or loss caused by accident abuse misuse or other acts of nature or external causes c damage or failure due to improper assembly improper installation overloading beyond rated capacity or use for purposes not intended d damage to a product resulting from modification or alteration Determination that damage or failure is not due to defects in material...

Отзывы: