Strainer bump
Bowl inner
groove
BOTTOM
OF THE
STRAINER
INSIDE
THE BOWL
Open
1
2,3
Assemble the parts in the order of bowl> spinning brush> strainer> squeezing screw> hopper (or assemble the spinning brush
into the bowl then fit strainer bump in the bowl inner groove). Make sure all the triangles of bowl [ OPEN ], strainer [ ▼] and
hopper [▼ ] are aligned in a vertical line.
Insert extraction packing at the bottom of the bowl hard enough into the pulp outlet.
Make sure bowl outer groove aligns with base bump completely.
Bowl outer groove
Base bump
Extraction
packing
Align the hopper rear part with base completely as in below.
The hopper does not close properly when the parts are not assembled correctly.
4
Hopper
rear part
Hopper
Strainer
Bowl
Spinning brush
Squeezing Screw
www.hurom.com I
09
SLOW JUICER ASSEMBLY IN DETAIL
HE_4PJ12170_V.01.indd 11
2013-01-24 오후 4:38:24