24
Folding arm awning manual, 4-2008
B) Adjustment of the arm support shoulder (Figure 6)
a) Fully extend the awning;
b)
Loosen socket bolts no. 1 and no. 2 of both arm support shoulder joints
(Allen key 4);
c) Position the arm support shoulder as required;
d) Tighten socket screw no. 1 on both sides;
e) Tighten socket screw no. 2 on both sides;
f) Retract the awning;
C) Pitch adjustment (Figure 7)
The pitch must be adjusted once the awning has been installed.
a) Fully extend the awning;
b)
Loosen the two socket bolts no. 1 (Allen key 6);
c) Turn socket bolt no. 2 (Allen key 6) for upwards or downwards movement
(counter clockwise = downwards, clockwise = upwards).
If the arm support shoulder is set at the correct height on one side, repeat the
previous steps for the other side until the arm support shoulder is aligned with
the awning cover.
Figure 6
Figure 7
www.thegaragedoorcentre.co.uk
0800 525 442
www.thegaragedoorcentre.co.uk
www.thegaragedoorcentre.co.uk
0800 525 442
www.thegaragedoorcentre.co.uk
