Lakeland EASYSTEAM IRON 25478, Инструкция пользователя, Страница: 6 / 32

6
BEFORE USING YOUR IRON FOR THE FIRST TIME
1. Unpack the iron, remove all the packaging materials.
2. Unwind the power cord.
3. Fill the iron with tap water, as described below in ‘Filling the Water Tank’.
4. Stand the iron upright on its anti-slip heel. Make sure the steam slider is turned to
‘No Steam’.
5. Plug in and switch on at the socket. The pilot light will blink and then illuminate.
6. When the pilot light goes out, the soleplate has reached temperature.
7. When you switch on the iron for the first time you may notice a slight burning smell,
this is normal for a new appliance and will stop after a few uses.
8. Move the steam control slider to the front of the iron ‘Maximum Steam’.
You will notice steam coming out of the soleplate.
9. Some residue may remain inside the iron from manufacture, so iron an old cloth or
tea towel for first use, do not use the iron on your laundry. Press the steam shot and
water spray buttons to run water through the iron.
10. When the water tank is empty, the iron is now ready to use.
FILLING THE WATER TANK
For best results, always make sure there is plenty of water in the tank when ironing, but
do not fill the tank beyond the ‘MAX’ level.
Only use water in the water tank. Do not add perfume, vinegar, chemically de-scaled
water or any other substances into the water tank.
1. Always make sure the iron is switched off and unplugged from the socket.
2. Slide the steam control slider to the
position. This is to prevent water leaking
from the soleplate onto your laundry.
3. Open the water tank cover.
MAX level