Lakeland DRY SOON 53343, Инструкция пользователя

Страница: 11 / 16

11
USING THE HEATER UNIT MANUALLY
1. When you plug in the heater unit and switch on at the mains socket the
display with show ‘000’ and bleep.
2. You can increase or decrease the time on the heater unit itself by using
‘Time +’ and ‘Time –’ buttons (up and down arrows) on the display.
3. The time will increase or decrease in 15 minute intervals from 15 minutes to
360 minutes (6 hours).
If you keep pressing the button it will cycle from 360 minutes back to
015 minutes.
4. Press the on/off button to start the heater unit working.
5. When the heating unit is running the display panel will flash the time
remaining.
6. When the heater unit has finished its
running time it will bleep twice and the
display panel with show ‘000’.
7. To switch off the heater unit press the on/
off button and let the heater unit cool
down completely before storing.
USING THE HEATER UNIT WITH THE REMOTE CONTROL
1. When you plug in the heater unit and switch on at the mains socket the
display with show ‘000’ and bleep.
2. Using the remote control, point it at the heater, you can
increase or decrease the time on the heater unit, by using
‘Time +’ and ‘Time –’ buttons (up and down arrows) on the
remote control.
3. The time will increase or decrease in 15 minute intervals
from 15 minutes to 360 minutes (6 hours). If you keep
pressing the button it will cycle from 360 minutes back
to 015 minutes.
4. Press the on/off button to start the heater unit working.
5. When the heating unit is running the display panel will
flash the time remaining.
6. When the heater unit has finished its running time it will bleep twice and the
display panel with show ‘000’.
7. To switch off the heater unit press the on/off button on the remote control.
Let the heater unit cool down completely before storing.
PLEASE NOTE: The middle two small circular buttons on the remote are not
required for this model airer.