16
ERROR MESSAGES
If a fault occurs, the appliance automatically disconnects the heating element and all the
buttons become invalid. The appliance will beep for 1 second and stop for 2 seconds,
and will repeat 10 times, all the LED Lights will turn on and the display panel will show
one of the following:
E1
Bottom sensor short circuit
E2
Short circuit
EH
Over heated, switch off and unplug the plug, wait for the appliance to cool down
completely, power on again and return to standby.
Please immediately switch off and unplug the plug from the power socket and contact
Lakeland Customer Care on 015394 88100.
FREQUENTLY ASKED QUESTIONS
Question:
Why are no indicator lights illuminated?
Answer:
Check that there is no debris underneath the cooking pot on top of the
heating plate, if so remove the debris. Replace the cooking bowl.
There may be damage to the heating plate or the power cable. Make sure
that the Digital Rice Cooker is properly connected to the cable, plugged in
and switched on at the wall socket.
Question:
Why is water overflowing when I am using the appliance?
Answer:
You may have put too much water inside the cooking pot. Do not fill above
the MAX level mark.
Question:
Why is my rice too dry and hard after cooking?
Answer:
There is not enough water in the cooking pot to start.
Question:
Why is my rice too moist and soggy after cooking?
Answer:
There is too much water in the cooking pot to start
Question:
Why is the bottom layer of rice browned or crispy at the bottom?
Answer:
The rice is not cleaned, wash the rice in water before you add it to the
cooking pot.
