INSTRUCTIONS FOR USE
• The appliance should only be used if it has been completely and correctly assembled.
• When you switch on the vacuum for the first time you may notice a slight burning smell,
this is normal for a new appliance and will stop after a few uses.
INTENDED USE
DO NOT use the appliance to suck up the following:
• Liquids or wet substances (e.g. wet carpet shampoo).
• Glowing ash, cigarette ends, matches and the like.
• Inflammable or explosive substances.
• Very fine dust (e.g. concrete dust), ash, or toner.
• Pointed, hard objects such as large pieces of broken glass.
OPERATION
9
• Put your foot on the floor cleaner head
at the side and towards the front, at
the same time pull the handle back, it
will be ready to work after hearing a
click sound.
• Press the power button and low
speed will be selected for a dry mop/
sweeping function.
• Guide the appliance slowly over the
surface to be swept and dust will
collect in the dust container.
• Repeat several times until all the dust
is swept in.
• The appliance is not suitable for cleaning particles larger than 10mm in diameter.
• Press the power button again and high speed will be selected for a wet mop function.
• To stop the appliance, press the power button again.
• Always empty the dust container after each use.
• During operation, the power light will be lit, along with the lights on the front of the floor
cleaner head. Please pay attention to the display, it will show the time left to run. As the
time decreases, the power level, shown by the number of battery indicator lights, will also
decrease. The appliance will stop working automatically when there is no power left.
• The bottom battery power light will flash, to warn you when the Cordless Turbo Floor
Cleaner needs recharging.