background image

8

TIMER 

This induction hob has a timer function that allows you to cook for a certain amount of 
time before switching off, this prevents food from boiling dry or burning. 

To set the timer: 

•  Set your dish to cook on the desired ‘Mode’ setting, see ‘A Guide to Cooking Modes’ table. 

•  Press the ‘Timer’ button, the time is shown in minutes, and the display will show ‘000’ 

to indicate that no time has been set. Sweep your finger around the heat control dial 
to set your desired length of cooking time. 

NOTE: 

On ‘Simmer’ mode the default time is 120 minutes. 

•  The hob will wait for 6 seconds after you have set the time before heating. The display 

will then countdown the time left to cook. 

•  At the end of the timed session ‘End’ will be displayed. The hob will turn off and the 

fan will run for a minute to cool down the hob. 

•  During timer cooking on the Hot Pot, Pan Fry and Stir Fry modes you can adjust the 

heat using the heat control dial. 

•  To stop the timer, turn the hob off and back on again and it will reset to ‘000’. 

CHILD SAFETY LOCK 

To turn on the lock when you have selected the mode and power/temperature, press the 
‘Child safety lock’ button for 2 seconds. A red light above the button will indicate the lock 
is on. When the lock is on only the On/off switch can be used, all the other buttons will be 
locked. Press the ‘Child safety lock’ button again for 2 seconds to unlock the hob. 

Содержание 17883

















Отзывы: