ELECTRICAL CONNECTIONS
THIS APPLIANCE MUST BE EARTHED
This appliance is fitted with a fused three-pin plug to BS1363 which is suitable for use in all homes fitted with
sockets to current specifications. If the fitted plug is not suitable for your socket outlets, it should be cut off and
carefully disposed of. To avoid an electric shock, do not insert the discarded plug into a socket.
Fitting a new plug
If for any reason you need to fit a new plug, the flexible mains lead must be connected as shown here. The wires
in the mains lead fitted to this appliance are coloured in accordance with the following code:
Connect BLUE to Neutral (N)
Connect GREEN & YELLOW to Earth (E)
Connect BROWN to Live (L)
3 amp fuse to be used
If the colours of the wires in the mains lead of this appliance do not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows. The wire which is coloured green and yellow MUST
be connected to the terminal which is marked with the letter E (Earth) or coloured green. The wire which is
coloured blue MUST be connected to the terminal which is marked with the letter N (Neutral) or coloured black.
The wire which is coloured brown MUST be connected to the terminal which is marked with the letter L (Live)
or coloured red.
Before refitting the plug cover, check that there are no cut or stray strands of wire inside the plug. Use a 3 amp
BS1362 fuse. Only BSI or ASTA approved fuses should be used. If you are at all unsure which plug or fuse to
use, always refer to a qualified electrician.
Note: after replacing or changing a fuse on a moulded plug which has a fuse cover, the cover must be refitted
to the plug; the appliance must not be used without a fuse cover. If lost, replacement fuse covers can be
obtained from an electrical shop. This appliance complies with the following EEC Directives: 73/23 EEC (Low
Voltage Directive) and 89/336 EEC (EMC Directive).
HANDY TEMPERATURE GUIDE
The Buffet Server is designed to reach a minimum temperature for each setting.
WARMING TRAY – 62-68°C (145-155°F)
This setting is only used when placing food directly onto the heated surface, or for keeping foil dishes of
takeaway food warm.
LOW – 45°C (115°F)
This is the minimum setting when using the large dish.
MEDIUM – 55°C (130°F)
This is the minimum setting when using the large dish and individual dishes together.
HIGH – 65°C (150°F)
This is the highest setting for the large and individual dishes.
Please note: when LOW, MEDIUM or HIGH is selected, the heated base will become much hotter than the
temperatures stated above. This is so that ample heat can be transferred to the food inside the dishes.
CARE AND CLEANING
Before cleaning the Buffet Server, ensure the temperature dial is turned to OFF and the power cord is
unplugged from the mains socket. CAUTION: always allow the Buffet Server to cool down completely before
cleaning.
Wash the lids in warm soapy water with a sponge or soft cloth. Rinse and dry thoroughly.
The large dish and individual dishes are dishwasher-safe. They may also be washed in warm soapy water with
a sponge or soft cloth. Rinse and dry thoroughly.
Wipe the heated base with a slightly damp cloth and dry thoroughly with a soft cloth. CAUTION: the heated
base, power cord and plug must not be immersed in water. Do not use abrasive cleaners or scouring pads as
they will damage the surface.
RECYCLING YOUR ELECTRICALS
Along with many other high street retailers, Lakeland has joined a scheme whereby customers can take their
unwanted electricals to recycling points set up around the country. Visit
www.recycle-more.co.uk
to find your
nearest recycling point.
0005
E
Earth(green/yellow)
L
N
Neutral(blue)
3
a
m
p
F
U
S
E
3amp fuse
Live(brown)
13482 Buffet Server IB 03_11:Layout 1
15/3/11
16:35
Page 7
