lakeair WM-RC2 120 Volt, Руководство по эксплуатации и обслуживанию, Страница: 8 / 15

8
Main Filter
The main filter will be one of 4 different filters. Possible options are Standard HEPA
(20 x 16 x 4.75), MERV 15 Media filter (20 x 16 x 4), Electrostatic filter (20 x 16 x 4.5)
or UVGI HEPA (20 x 26 x 2.4) The main filters fit snugly into the filter box and can be
removed easily. All 4 filters have a lip that allows you to get a good hold on the
filters. The filter lip may be a bit sharp so take care not to cut yourself.
Move the filter back and forth with a side-to-side motion drawing it slowly to you.
You can reinstall the filter in the same manner gently moving the filter back into
place. The main filter should touch the carbon filter.
Carbon Filter
The carbon filter is located directly behind the main filter. To remove the carbon
filter, put your fingers on the lip of the filter and gently remove the filter with a side-
to-side motion. Note: The lip is metal and may be a bit sharp use caution not to cut
yourself while removing. In an UVGI unit the carbon filter is incorporated into the
UVGI chamber. You should never run the UVGI filter without a carbon filter both in
front and back of the UVGI element.