lakeair LA2-RC2-Kitchen, Руководство по эксплуатации и обслуживанию

Страница: 8 / 12

8
Filter Removal and Installation
The pre filter is the first of 3 filters used in the LA2-RC2-Kitchen . The pre filter removes
large particles from the air stream. It also extends the life of the main filter. The pre
filters rating is MERV 2 and its Part# is 49005 1 . The pre filter is mounted closest to the air
in take. This filter slides out
The grease filter is next in line moving back from the intake towards the blowers. This filter
uses baffles to trap grease that is suspended in the air. This filter is held in snugly but will
slide out as well. This filter should be checked regularly for grease build up.
The 3rd filter in the air purification line is the electrostatic cell. This filter is held in by a
screw that helps provide a ground for the filter and help it run efficiently. Remove the
screw using a Philips screwdiver. Always replace the screw after washing this filter.
The final filter is a Ultra 3.0 carbon filter, This filter removes kitchen odors and gasses.
Carbon can hold a finite amount of odor and after it has absorbed all it can it must be
replaced, This will depend on the amount of odor in your kitchen. When the filter has
stopped absorbing odors it must be thrown away and replaced. You cannot was a
carbon filter.